
320 CHAPTER 19: IPX ROUTER
NLSP Area Mask
The mask indicates how many bits of the network number identify the area. The
default value is 0
.
Broadcast HELLO Interval
This is the interval, in seconds, between NLSP HELLO packets sent on a LAN
circuit by systems other than the circuit’s designated router (DR). It ranges from 1
to 65535. The default value is 10
.
Non-broadcast HELLO Interval
This is the interval, in seconds, between NLSP HELLO packets sent on WAN
circuits. It ranges from 1 to 65535. The default value is 10
.
Designated Router HELLO Interval
This is the interval, in seconds, between NLSP HELLO packets sent on a LAN
circuit by the circuit’s designated router (DR). It ranges from 1 to 65535. The
default value is 3
.
Holding Time Multiplier
When a HELLO packet is not received for a period of seconds of (Holding Time
Multiplier × HELLO Interval), the adjacent router is considered dead. On a WAN,
this period is 5 × 10 = 50 seconds with the default values. It ranges from 1 to
65535. The default value is 5
.
Clear IPX ROUTER application
Use this option to clear the IPX Router Configuration from the TXPORT device.
Selecting this option restores the default values.
Kommentare zu diesen Handbüchern