Verilink M1-3 (880-503136-001) Product Manual Bedienungsanleitung PDF herunterladen (Seite 20)

Quick Set-Up

2-2 Verilink M1-3 User Manual

Installation

Mount the shelf within an air-conditioned room on a standard 19 or

23” rack. Refer to the AS3000: The Basics manual for detailed

module installation instructions and precautions.

CAUTION

Verilink components contain static-sensitive circuits. Before unpacking

the equipment, ensure you are wearing an anti-static wrist strap

connected to frame ground to prevent damage to circuits from

electrostatic discharge.

Module

Installation

Install the M1-3 module components as follows:

1. Install the rear connector module, CIM 3113 into the back of

the MLS shelf, slot 6.

2. Install the M1-3 module into the front of the shelf in slot 6.

3. Connect the T3 cables to the ports on the CIM 3113.

The M1-3 module verifies self test (LEDs flash red, then green, in

rapid succession).

Connect a Craft cable to the port labelled

LOCAL

on the front of the

SCM module. Connect the other end of the Craft cable to your PC or

terminal. If using a PC, start a session in a terminal program.

1. Set your terminal parameters to:

•

19.2 kbit/s

•

8 data bits

•

No parity

•

One stop bit

•

No flow control

2. Press

NTER

and the

pSH+>

pSH+>pSH+>

pSH+>

prompt displays.

3. Type “craft” (lowercase).

The prompt

Your Password

Your PasswordYour Password

Your Password

displays.

4. Initially there is no password, press

NTER

The

SCM Main Menu

displays.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 74 75

Kommentare zu diesen Handbüchern

Keine Kommentare

Verilink M1-3 (880-503136-001) Product Manual Bedienungsanleitung Seite 20

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Verilink M1-3 (880-503136-001) Product Manual