Verilink C100 (880-502893-001) Product Manual Bedienungsanleitung Seite 29
- Seite / 135
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Configuration Using the DIP Switches
06/17/97
C100 and C150 T1/FT1 CSU/DSU
3-5
Programming the network interface
Switch pack 2 is used to program the Network Interface (NI). The
following is a description of the Network Interface settings:
Table 3-2 C100 and C150 Switch-2: Network Interface
NI Framing
Switch pack 2 position 1 determines the type framing. With position 1
Off, the unit will generate and expect ESF framing to and from the
Network Interface. With position 1 On, the unit will generate and
expect D4 framing. The framing selected in the unit must match the
framing option provided by the T-1 Carrier
NI Coding
Switch pack 2 position 2 selects the type of coding the unit will
generate. Position 2 Off, makes the unit generate B8ZS encoding and in
the On position causes the unit to generate AMI (Alternate Mark
Inversion) encoding. This coding selection, similar to the framing,
must match the provisioning provided by the T-1 Carrier supplier
otherwise intermittent errors may occur.
12345678 Setting
Off-------ESF Framing
On-------D4 Framing
Off------B8ZS Coding
On------AMI Coding
Off-----Enforce Density
On-----Clear Channel
Off----AT&T 54016
On----ANSI T1.403
Off Off 0 dB Line Build Out
On On -7.5 dB Line Build Out
On Off -15 dB Line Build Out
Off On -22.5 dB Line Build Out
Off Off Network supplies Timing
Off On Internal Timing
On Off DSX-1 supplies Timing
a
a. C150 only
On On Channel supplies Timing
Off Off On Off Off Off Off Off Factory default setting
- “C” Series 1
- • C100 T1/FT1 CSU/DSU 1
- User Manual 1
- Copyright notices 2
- Warnings and Caution Notices 3
- Important Safety 4
- Instructions 4
- Table of Contents 5
- C100 and C150 T1/FT1 CSU/DSUs 7
- List of Figures 9
- Contents 10
- List of Tables 11
- Introduction 13
- DIP-switch and 15
- C100 front and rear 15
- C100 rear panel 16
- C150 front and rear 16
- C150 rear panel 17
- Applications 18
- C150 only 19
- Installation 23
- Overview 25
- IMPORTANT 26
- Unit address 27
- Switches, console 27
- Remote loop 28
- NI Framing 29
- NI Coding 29
- 54016 or T1.403 30
- Line build out 30
- Channel or DSX-1 timing 31
- DSX1 in or out 32
- DSX1 framing 32
- DSX1 coding 33
- DSX1 line 33
- Idle or busy 33
- Synchronous 34
- 56000 or 64000 35
- Continuous or 36
- (Receive Line 36
- Signal Detect) 36
- Local T-1 CSU/DSU 37
- Remote T-1 CSU/DSU 37
- DS-O assignment 39
- Channel LED Indicators 42
- CI Chan DSR 43
- CI Chan CD 43
- CI Chan DTR 43
- Local Network 45
- Interface (NI) 45
- Loopback 45
- Local DSX1 channel 46
- Local Synchronous 47
- Channel Loopback 47
- Local Payload 48
- Remote Network 48
- Remote DSX1 49
- Test Pattern 50
- C150 Test Pattern 51
- Select and Start 52
- Push-button 52
- C100 and C150 T1/FT1 CSU/DSU 53
- TX RX 54
- 500 Ohms 54
- Using the Console Port 55
- Cabling a Modem to 56
- Using the console port 57
- Console 58
- Main Menu 59
- Activating and 59
- Navigating the 60
- Utilities 61
- Set Date 62
- Rename Header 62
- Set Password 62
- Console Port 63
- Configuration menu 64
- NI framing 66
- NI coding 66
- AT&T or ANSI 66
- DSX-1 IN OR OUT 68
- DSX-1 FRAMING 68
- DSX-1 coding 68
- DSX-1 line length/build out 68
- C100/C150 69
- C150 DSO 71
- C100 DSO 71
- Configuring for SNMP 74
- Connecting the 75
- Network 75
- Management 75
- 4. Power-on the unit 76
- 06/17/97 79
- Diagnostics and Statistics 81
- Remote DSX-1 loop 83
- Test pattern (C100) 83
- Test pattern (C150) 83
- Test Seconds 84
- Secs In Err and 84
- Error Free Secs 84
- Counters and 85
- Statistics 85
- Chan TX and RX LEDs 88
- Chan CD LED 88
- C100 and C150 Specifications 89
- Network protection 90
- Indicators 90
- Switches 91
- Power supply AC-to-DC adapter 92
- Environmental 93
- 98
- ROUTER 98
- TEL-LINK 98
- T1 CSU/DSU 98
- Sample Applications 101
- Network provides timing 102
- Interfaces and Cables 107
- CCITT V.35 108
- Channel Interface 108
- RS232/RS530/RS4 109
- 22 channel 109
- Console IN 111
- Interface 111
- Console OUT 111
- Part Number 113
- 458-503010-001 113
- 458-503012-001 113
- 458-502361-015 114
- C100 and C150 SNMP MIB 115
- Transmission group 116
- DS1 Near End 117
- DS1 Configuration 117
- Table (x = 6) 117
- DS1 Current Table 121
- DS1 Interval Table 122
- DS1 Total Table 124
- DS1 Far End Group 125
- DS1 Fractional 125
- Group (x = 13) 125
- 1.3.6.1.4.1.2270.w.x.y.z 128
- Configuration Group 129
- (sysConfig x=1) 129
- Channel 130
- (chnConfig x=2) 130
- DSX1 Configuration 131
- Group (dsx1Config 131
- —C150 only— 131
- June 1999 135
Verwandte Produkte und Handbücher für Computerhardware Verilink C100 (880-502893-001) Product Manual
Computerhardware Verilink Craft Interface (No Part Number) Product Manual Bedienungsanleitung
(8 Seiten)
(8 Seiten)
Computerhardware Verilink DIDCSU 2912 (880-502646-001) Product Manual Bedienungsanleitung
(107 Seiten)
(107 Seiten)
Computerhardware Verilink FrameStart FSD (34-00291.F) Product Manual Bedienungsanleitung
(49 Seiten)
(49 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.017 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern