Verilink WANsuite 6x30 (34-00315.B) Product Manual Bedienungsanleitung Seite 91

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 181
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 90
Web Server Interface
3-63
DHCP Details Screen
The DHCP Details screen (
Figure 3.62) lets you configure the parameters
described below.
Figure 3.62
DHCP Details Screen
Enable
Enables or disables the DHCP Server. Default is “Enable.”
Number of Ports
Defines the number of DHCP ports to be used. In this version, only “1” is a
valid value.
TTL
Time to Live for any DHCP packet. Default is 64.
Service Type
Type of Service used by the DHCP Server packet. Default is 1.
Lease Time
Tells the DHCP client the number of seconds it can retain this IP address. The
client should make a new DHCP request within the specified amount of time
to ensure the IP address is not given to another PC. Default is 600 seconds.
Primary DNS IP Addr
If requested by DHCP client, the client then uses this address to resolve
names of IP addresses. Default is 0.0.0.0.
Secondary DNS IP
Addr
If requested by DHCP client, the client then uses this secondary address to
resolve names of IP addresses. Default is 0.0.0.0.
Domain Name
Domain name to be used by all DHCP clients. Default is user’s server.
Router IP Addr
IP address that all clients use for Gateway or Router. Default is 0.0.0.0.
The DHCP Details screen provides the following user-activated buttons:
Button
Function
Submit
Sets any values that have been changed.
Host Table
Lists Host names (DHCP server identification).
Static Entry Table
Creates a list of static IP addresses associated with MAC
addresses.
IP Address List Table
Defines the addresses available for DHCP clients.
Seitenansicht 90
1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 180 181

Kommentare zu diesen Handbüchern

Keine Kommentare