Verilink WANsuite 6450 (34-00326) Product Manual Bedienungsanleitung PDF herunterladen (Seite 107)

Web Server Interface 3-79

The table below shows the possible file operations.

Note that when updating the application software using a .HEX file, the

filename should have the form xxAPxxxx.HEX; the AP indicates the file is

an application load. When updating the boot software, the filename should

have the form xxWBxxxx.HEX; the WB indicates the file is a boot load.

Password

The Password Details screen (Figure 3.78) is used to modify the password

that restricts access to the Web Server interface.

Acceptable characters for use in a password are digits 0–9 and letters A–Z

and a–z, for a total of 62 distinct characters.

Figure 3.78

Password Details Screen

To change either the Admin or Read-Only password, you must enter it once

in the New Password field and then re-enter the same password in the

Confirm Password field. After entering the new password in both these fields,

click the “Change Admin Password” or the “Change Read Only Password”

button to update and establish the new password.

NOTICE: Remember that passwords are case-sensitive. When logging on,

password must be entered exactly as it was programmed.

Log Out

The Log Out screen (Figure 3.79) is used to log the current user off of the

Web Server.

Operation Filename Extension Action

Update Application Firmware .CHX or .HEX(1) Get

Update Boot Firmware .HEX(2) Get

Save Configuration Setup .CFG Put

Restore Configuration Setup .CFG Get

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 204 205

Keine Kommentare

Verilink WANsuite 6450 (34-00326) Product Manual Bedienungsanleitung Seite 107