Verilink WANsuite 5370 (34-00310.D) Product Manual Bedienungsanleitung PDF herunterladen (Seite 146)

4-30 WANsuite 5370

To change the Username and Password for a selected PAP Index, enter the

new information in the appropriate field(s) and press the “Esc” key.

To delete the Username and Password for a selected PAP Index, delete the

character string displayed in both fields (leaving them blank) and press the

“Esc” key.

CHAP Table and Details Screens

From the PPP Service Details screen, select “CHAP Table” to view a table of

the CHAP Username and Secret information for each of 10 entries. This table

and its Details screen look the same as the PAP Table and Details screens.

IP Service Details Screen

The IP Service Details screen (Figure 4.10), accessed by selecting “IP” from the

<Type> column in the IP Service screen, lets you configure the IP parameters

described on page 4-13.

To change any of the available parameters, you must enter new values in the

appropriate field(s) and press the “Esc” key to save your changes.

NOTICE: To use newly established IP parameters, you must “Save and Restart.”

(See "Save and Restart" on page 4-6.)

SCADA Service Details Screen

NOTICE: SCADA traffic has a higher priority than other types of traffic flowing

through the unit. Refer to Normal Tx Queue Size on page 4-23 for more

details.

The SCADA Service Details (Figure 4.26) screen lets you access and read or

change the parameters listed below.

Figure 4.26

SCADA Service Details Screen

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 234 235

Keine Kommentare

Verilink WANsuite 5370 (34-00310.D) Product Manual Bedienungsanleitung Seite 146