Verilink WANsuite 5230 (34-00304.F) Product Manual Bedienungsanleitung Seite 162

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 233
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 161
4-46 WANsuite 5260/5230
Figure 4.38
Rule Config Screen
The paragraphs below describe the rule configuration parameters and their
options.
Service
Selects the service to which the rule applies.
NOTICE: If you change the Service parameter, you must press the “Enter” key to
see the appropriate DLCIs.
DLCI
Selects the DLCI to which the rule applies.
Filter By DLCI
Enables or disables filtering of the IP traffic in accordance with the previously
specified DLCI.
NOTICE: To use this filter, you must specify both the Service and DLCI
parameters in the rule configuration.
IP Address
Establishes the IP address by which the rule will filter IP traffic (if enabled).
IP Mask
Represents a range of IP addresses defined so that only machines with IP
addresses within the range defined by the mask are allowed to access an
Internet service. To mask a portion of the IP address, replace it with the wild
card character “0” (zero). (For example, 192.44.0.0 represents every computer
on the Internet with an IP address beginning with 192.44.)
Filter By IP Address
Enables or disables filtering of the IP traffic by the IP address specified in the
IP Address or IP Mask field.
Enter IP Port or Select
From List
Establishes the IP port by which the rule will filter IP traffic (if enabled).
Seitenansicht 161
1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 232 233

Kommentare zu diesen Handbüchern

Keine Kommentare