Verilink ConnecT 56K DSU (896-502110-001) Product Manual Bedienungsanleitung PDF herunterladen (Seite 58)

Operation

3-28

ConnecT 56K DSU User Manual

Submenu 2 network

A two digit decimal address can be assigned to each ConnecT 56K DSU.

This addressing capability makes it possible to perform remote

configuration and testing in Point to Point and a multi-drop network.

Use the numbers keys to select an address press the Enter key to enter the

address into the system resulting in the system briefly displaying

“Command Accepted” and returning to the active Network Address

menu.

Table 3-13 Network Address Commands

Submenu 3 remote configuration

This option sets up the ConnecT 56K DSU to accept or reject remote

configuration commands. Use the number of the desired mode to activate

the selection press Enter to select the mode resulting in the system briefly

displaying “Command Accepted” and returning to the active Network

Opt. menu with the REMOTE CONFIG. selection active.

Table 3-14 Remote Configuration Commands

Submenu 4 network type

The Network Type option configures the ConnecT 56K DSU for the

specific type of network being used. Use the number of the desired

network type to activate the selection press Enter to select the network

type resulting in the system briefly displaying “Command Accepted” and

returning to NETWORK OPT. menu with the NETWORK TYPE

selection active.

Note:

Additional menus become available when using the Accunet SW

56 or the US Sprint SW56. See Main Menu 4=Dial at the end of

the menu section.

Front Panel AT Command Selections Description

XX (Decimal) _N=xx Assigns a 2 digit Network Address

Front Panel AT Command Selections Description

1=DISABLE &P4 Disable Remote Configuration

2=DISABLE &P5 Enable Remote Configuration

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 87 88

Keine Kommentare

Verilink ConnecT 56K DSU (896-502110-001) Product Manual Bedienungsanleitung Seite 58