Verilink Ethernet Token Ring (CG) Configuration/Installatio Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Computerhardware Verilink Ethernet Token Ring (CG) Configuration/Installatio herunter. Verilink Ethernet Token Ring (CG) Configuration/Installation Guide User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 1
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Part Number 45-00092
Rev 2.0
Ethernet/Token Ring Card
Installation Guide
This installation guide contains the procedure to configure and install an Ethernet or Token Ring card into a 3100 series, 4100
series, or an 8100A unit.
Step 1:
[Ethernet card only] Configure the ethernet card by setting the jumper (J1) and the dual in-line package (DIP)
switches (S1). Refer to bottom figure for location identification. Refer to the following table for setting positions.
Step 2:
Disconnect power to the unit. Flip the unit and place it on a flat surface. Remove the four screws with a Phillips
head screwdriver. Then, flip the unit back to the upright position. Gently remove the top cover to expose the main
circuit board.
Step 3:
Insert the plastic stand-offs on the card into the main circuit board. as shown in the figure below.
Step 4:
Once the board is firmly connected, place the cover back on the unit, flip the unit, and reinsert the four screws.
Unit J1 S1-1 (A16) S1-2 (A17) S1-3 (A18) S1-4 (A19)
3100 Series 1-2 Off Off On On
4100 Series 2-3 Off Off On On
8100A 2-3 Off On Off On
S1 settings have four different interpretations:
On = Closed = Up = 0
Off = Open = Down = 1
PRISM 3101
TEST LOOP
TEST
LOOP NET ALARM POWER
TRANSPORT
PRISM 3101
TEST LOOP
TEST
LOOP NET ALARM POWER
TRANSPORT
screws
screws
PRISM 3101
TEST LOOP
TEST
LOOP NET ALARM POWER
TRANSPORT
A
B
C
D
A
B
C
D
S1, S2 and S3
switches
J1
S1
TRANSPORT
®
Seitenansicht 0
1

Inhaltsverzeichnis

Seite 1 - Installation Guide

Part Number 45-00092Rev 2.0Ethernet/Token Ring Card Installation Guide This installation guide contains the procedure to configure and install an Ethe

Kommentare zu diesen Handbüchern

Keine Kommentare